-
Thin magnetically loaded sheet stock having loss at microwave frequencies while maintaining the desirable characteristics of elastomeric binders. Exhibiting high loss intended to be applied to metal surfaces inside microwave cavities to reduce the Q of the cavity.
-
A lightweight conductive carbon loaded sheet stock providing broadband reflection loss at microwave frequencies. Exhibiting high reflection loss and intended to be applied to metal surfaces inside test boxes, housings, radomes, network enclosures, or antennae.
-
Lightweight conductive carbon loaded sheet stock providing broadband insertion loss at microwave frequencies. Exhibiting high reflection loss and intended to be applied to metal surfaces inside microwave cavities, housings, radomes, network enclosures, or antennae.
-
A magnetically loaded sheet stock having high loss at sub-microwave frequencies. Low Frequency Absorbers designed with shaped magnetic particles exhibiting high permeability at frequencies from 1 MHz to 3 GHz.
-
A lightweight conductive carbon loaded sheet stock providing broadband loss at microwave frequencies. A continuous gradient coating exhibiting high reflection loss for application to metal surfaces inside microwave cavities, housings, radomes, network enclosures, or antennae.
-
Thermal phase change materials completely fill interfacial air gaps and voids and displace entrapped air between power dissipating electronic components. Designed to maximize heatsink performance and improve component reliability.
-
Thermally and electrically conductive materials for usewhere electrical isolation is not required. Conforms exactly to surfaces, maximizing heat transfer.
-
Future generation compliant cooling materials and the softest and highest thermally conductive gap fillers available ranging from 0.20 mm to 5.08mm.
-
Thermally conductive silicone materials are cost effective thermal interface materials that offer a good level of environmental sealing. Thermally and electrically conductive silicone can be used where electrical isolation is not required.
-
Thermal interface materials available in wide range of materials and thicknesses according to required thermal conductivity and voltage breakdown. Available as sheets or die cut parts. Pressure sensitive adhesive an option.
-
Torstran™ is a new range of carbon nanotube sheet (CNT) materials and fibres that have been developed by Tortec and supported by research conducted at Cambridge University Engineering Department. These materials are manufactured using an innovative gas plasma process that forms a unique 3D array of interconnected carbon nanotubes.
-
High performance EMI gasket materials that provide optimal shielding effectiveness & excellent environmental sealing.
-
A thin, very highly loaded sheet stock with high loss at microwave frequencies, while maintaining characteristics of elastomeric binders. The most heavily magnetically loaded absorberexhibiting the highest loss for application applied to metal surfaces for traveling or surface wave attenuation.
-
A thin magnetically loaded sheet stock providing great reflection loss at a discrete frequency, typically offering 20dB of attenuation. Tuned Frequency Absorbers offer a narrowband of absorption so best used when a single discrete frequency is trying to be absorbed.
-
Precise guidance of a fluid dispensing nozzle under CNC control for continuous application of intricate, small cross-section gaskets directly onto component or substrate contours.
-
For a variety of RFI/EMI shielding and grounding applications – conductive flexible and structural conductive adhesives.
-
Conductive, high strength, permanent metal to metal bondsideal for assembly of metallic enclosures negating the use of fasteners, welding or machining operations.
-
Electrically conductive materials comprising of a silicone RTV and conductive particles. Easily applied to panel joints/seams and small clearances.
-
An effective, thin EMI gasket material providing a watertight or pressure seal where sealing faces have a flatness tolerance of >0.05mm
-
Solid and sponge silicone gasket material populated with vertically oriented monel or aluminium wires up to 140/sq cm. Excellent low contact resistance and high level of environmental sealing.
-
A combination gasket available in a variety of permutations of mesh and elastomer, to combine excellent EMI performancewith dust, environmental, or pressure sealing capability.
-
Monel, Aluminium, Stainless Steel or Tin plated Copper clad Steel wire into continuous sections or strips. A range of tough, resilient gasket sections that offer excellent shielding performance.
-
Ideal for development production capable of up to 100 off runs, the 3D printed parts can be made in a range of polymers including ABS and polypropylene, as well as specialist conductive plastics. Added EMI shielding protection can also be applied in the form of our anti static/conductive or shielding paints.
-
Low-cost EMI Vent Panels for use with 40mm, 60mm, 80mm, 92mm & 120mm fans. Available ‘off the shelf’ for fast delivery.
-
Shielding Ventilation Panels and filters primarily designed to allow unrestricted air-flow whilst preventing the transmission of electromagnetic interference (EMI).
-
A range of conductive paints and coatings to suit most requirements and can be applied to most surfaces to provide flexible and hardwearing conductive and antistatic finishes.
-
Electrically conductive fabric over-foam gasket sections are formed by wrapping a conductive (or metallised) fabric over a foam elastomer core. A synthetic textile yarn uniformly plated throughout its cross-section to provide consistent low resistivity.
-
Extremely flexible and durable with a good resistance to tearing. Uniformly plated throughout its cross-section to provide consistent low resistivity. Particularly resistant to abrasion.
-
Manufactured from beryllium copper foil, resilient/compliant to provide low-contact resistance between mating faces giving excellent EMI shielding performance. Very low closure force, light gauge foil sections available.
-
Arange of Connector Gaskets material types. Low and high compression forces, corrosion problems, high temperatures and poor fittings all overcome by appropriate material selection.
-
Copper foil, Aluminium foil, Tinned Copper foil and Nickel over copper metallised synthetic textile yarn tapes.
-
Thin silicone or polydimethylsiloxane (PDMS) membrane products used as a barrier to liquid and permeable path for various gaseous elements and compounds. Supplied in sheets or rolls from 0.075mmto 1mm thick.
-
Lubricating materials capable of sustaining extremely low (-100°C) or high temperatures (290°C). Supplied in packages from small tubes to drums ensuring that you receive products that seamlessly work in your manufacturing or maintenance equipment.
-
-
Effective isolation of board level components and the most cost-effective production method. Being custom made, the cans can be manufactured toincorporate a range of design features to suit individual applications.
-
A service for bonding windows or components together without the need for complicated assembly methods.We can assemble your free issued windows and other materials using our dedicated equipment or we can manufacture and supply the required components and assemble them in house.
-
Allowing the transmission of light whilst preventing the transmission of electromagnetic interference or EMI. An antireflective finish to improve the viewing characteristics of the window.
-
Conductive elastomer and form in place compounds available to purchase and process yourself. With our expertise and in-house compounding facility, we can provide any specification of paste that you may require giving the longest possible product shelf life and reducing waste.
